13VAC5-63-549. Chapter 8 Referenced standards.
Change the referenced standards in Chapter 8 of the IPMC as follows (standards not shown remain the same):
Standard reference number | Title | Referenced in code section number |
ASSE 5010‑1013‑1 | Field Test Procedure for a Reduced Pressure Principle Assembly Using a Differential Pressure Gauge, 1991 | 505.3.2 |
ASSE 5010‑1015‑1 | Field Test Procedure for a Double Check Valve Assembly Using a Duplex Gauge, 1991 | 505.3.2 |
ASSE 5010‑1015‑2 | Field Test Procedure for a Double Check Valve Assembly Using a Differential Pressure Gauge ‑ High‑ and Low‑Pressure Hose Method, 1991 | 505.3.2 |
ASSE 5010‑1015‑3 | Field Test Procedure for a Double Check Valve Assembly Using a Differential Pressure Gauge ‑ High Pressure Hose Method, 1991 | 505.3.2 |
ASSE 5010‑1015‑4 | Field Test Procedure for a Double Check Valve Assembly Using a Site Tube, 1991 | 505.3.2 |
ASSE 5010‑1020‑1 | Field Test Procedures for a Pressure Vacuum Breaker Assembly, 1991 | 505.3.2 |
ASSE 5010‑1047‑1 | Field Test Procedure for a Reduced Pressure Detector Assembly Using a Differential Pressure Gauge, 1991 | 505.3.2 |
ASSE 5010‑1048‑1 | Field Test Procedure for a Double Check Detector Assembly Using a Duplex Gauge, 1991 | 505.3.2 |
ASSE 5010‑1048‑2 | Field Test Procedure for a Double Check Detector Assembly Using a Differential Pressure Gauge ‑ High‑ and Low‑Pressure Hose Method, 1991 | 505.3.2 |
ASSE 5010‑1048‑3 | Field Test Procedure for a Double Check Detector Assembly Using a Differential Pressure Gauge ‑ High‑Pressure Hose Method, 1991 | 505.3.2 |
ASSE 5010‑1048‑4 | Field Test Procedure for a Double Check Detector Assembly Using a Site Tube, 1991 | 505.3.2 |
CAN/CSA‑B64.10‑01 | Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance and Field Testing of Backflow Prevention Devices | 505.3.2 |
Statutory Authority
§ 36-98 of the Code of Virginia.
Historical Notes
Derived from Virginia Register Volume 34, Issue 18, eff. September 4, 2018.