17VAC15-50-70. Densities.
All densities shall be consistent throughout the microform. The background density on negative appearing original silver masters shall meet or exceed 1.8. Background density on positive appearing silver masters shall be no greater than 0.30. Measurements are made using a densitometer properly calibrated from a step tablet.
Statutory Authority
§§ 42.1-8 and 42.1-82 of the Code of Virginia.
Historical Notes
Derived from VR440-01-137.5 § 5.3, eff. July 9, 1986; and October 1, 1991; amended, Virginia Register Volume 17, Issue 14, eff. May 1, 2001.
Website addresses provided in the Virginia Administrative Code to documents incorporated by reference are for the reader's convenience only, may not necessarily be active or current, and should not be relied upon. To ensure the information incorporated by reference is accurate, the reader is encouraged to use the source document described in the regulation.
As a service to the public, the Virginia Administrative Code is provided online by the Virginia General Assembly. We are unable to answer legal questions or respond to requests for legal advice, including application of law to specific fact. To understand and protect your legal rights, you should consult an attorney.