18VAC10-20-210. Requirements for licensure as a professional engineer.
A. In order to be licensed as a professional engineer, applicants shall:
1. Satisfy one requirement of subdivisions B 1 through B 4 of this section;
2. Pass the Principles and Practice of Engineering (PE) exam;
3. Meet all the requirements of this chapter; and
4. Apply to and be approved by the board.
B. In general, the required education shall be applied as follows:
EDUCATIONAL REQUIREMENTS | EIT REQUIRED? | NUMBER OF REQUIRED YEARS OF QUALIFYING ENGINEERING EXPERIENCE |
1. Have graduated from an approved engineering program. | YES | 4 |
2. Dual degree holders. a. Have graduated from an ABET-accredited undergraduate engineering program; and b. Have graduated from a doctorate engineering program that is ABET accredited at the undergraduate level. | NO | 4 |
3. Have graduated from a nonapproved engineering program of four years or more, a related science program, or an approved engineering technology program. | YES | 6 |
4. Have graduated from a nonapproved engineering technology program of four years or more. | YES | 10 |
Statutory Authority
§§ 54.1-201 and 54.1-404 of the Code of Virginia.
Historical Notes
Derived from VR130-01-2 § 4.6, eff. October 18, 1985; amended, Virginia Register Volume 4, Issue 8, eff. March 1, 1988; Volume 6, Issue 20, eff. September 1, 1990; Volume 7, Issue 14, eff. May 8, 1991; Volume 8, Issue 7, eff. February 1, 1992; Volume 10, Issue 15, eff. May 19, 1994; Volume 13, Issue 23, eff. October 1, 1997; Volume 16, Issue 3, eff. December 1, 1999; Volume 18, Issue 7, eff. March 1, 2002; Volume 23, Issue 1, eff. February 1, 2007; Volume 32, Issue 6, eff. January 1, 2016; Volume 37, Issue 24, eff. September 2, 2021.