9VAC5-40-4910. Applicability and designation of affected facility.
Article 35
Emission Standards for Flatwood Paneling Coating Application Systems (Rule 4-35)
A. Except as provided in subsection C of this section, the affected facility to which the provisions of this article apply is each flatwood paneling coating application system.
B. The provisions of this article apply only to sources of volatile organic compounds in volatile organic compound emissions control areas designated in 9VAC5-20-206.
C. The provisions of this article do not apply to the following:
1. Coating application systems used exclusively for determination of product quality and commercial acceptance provided:
a. The operation is not an integral part of the production process;
b. The emissions from all product quality coating application systems do not exceed 400 pounds in any 30 day period; and
c. The exemption is approved by the board.
2. Coating application systems involved in the manufacture of exterior siding, tileboard or particleboard used as a furniture component.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-3501, eff. July 1, 1991.