Administrative Code

Creating a Report: Check the sections you'd like to appear in the report, then use the "Create Report" button at the bottom of the page to generate your report. Once the report is generated you'll then have the option to download it as a pdf, print or email the report.

Virginia Administrative Code
Title 24. Transportation and Motor Vehicles
Agency 20. Department of Motor Vehicles
Chapter 81. Hauling Permit Regulation
8/11/2020

24VAC20-81-110. General Blanket Permit.

General blanket permits allow frequent movements within a specified time period on designated or unrestricted routes in Virginia. General blanket permits are issued on a case-by-case basis and only after appropriate reviews or analysis have been completed to ensure the vehicle configuration will not harm or damage bridges, structures, or other state inventory along the routes of travel.

General blanket permits are vehicle specific and cannot be transferred between vehicles. Since the permits are vehicle specific, the original permit or a legible copy of the entire permit is required to be carried in the transport vehicle. This permit shall be presented to Department of Motor Vehicles, law enforcement or Department of Transportation officials when requested.

All general blanket permits are issued through the Virginia Department of Motor Vehicle's headquarters office and all requests shall be made at least 10 workdays prior to the anticipated movement date.

Maximum Size and Weight Limitations for the General Blanket Permit

Height:

14 feet

Width:

14 feet

Length:

100 feet (including front or rear overhang)

Single Axle:

24,000 pounds

Tandem Axle:

44,000 pounds

Tri-Axle:

Maximum weight based on axle spacing between the centers of the first and last axle in the 3-axle group - see 24VAC20-81-80.

Quad Axle:

Maximum weight based on axle spacing between the centers of the first and last axle in the 4-axle group - see 24VAC20-81-80.

Gross Weight:

Maximum weight based on the total number of axles in the configuration and the amount of spacing between the centers of the first and last axles - see 24VAC20-81-80.

Statutory Authority

§ 46.2-203 and Article 18 (§ 46.2-1139 et seq.) of Chapter 10 of Title 46.2 of the Code of Virginia.

Historical Notes

Derived from Volume 25, Issue 26, eff. September 30, 2009.

Website addresses provided in the Virginia Administrative Code to documents incorporated by reference are for the reader's convenience only, may not necessarily be active or current, and should not be relied upon. To ensure the information incorporated by reference is accurate, the reader is encouraged to use the source document described in the regulation.

As a service to the public, the Virginia Administrative Code is provided online by the Virginia General Assembly. We are unable to answer legal questions or respond to requests for legal advice, including application of law to specific fact. To understand and protect your legal rights, you should consult an attorney.