4VAC25-40-1080. Walls or benches.
When drilling next to a wall or bench, drillers shall:
1. Remove any loose, unconsolidated material from the bench or wall above the work area;
2. Position the drill in such a manner that the controls are on the side of the drill away from the bench or wall; and
3. Never work between the drill and the bench or wall if their escape from the work area may be hindered by falling material.
Statutory Authority
§§ 45.1-161.3, 45.1-161.294 and 45.1-161.305 of the Code of Virginia.
Historical Notes
Derived from VR480-05-1.2 § 7.15, eff. July 19, 1989.
Website addresses provided in the Virginia Administrative Code to documents incorporated by reference are for the reader's convenience only, may not necessarily be active or current, and should not be relied upon. To ensure the information incorporated by reference is accurate, the reader is encouraged to use the source document described in the regulation.
As a service to the public, the Virginia Administrative Code is provided online by the Virginia General Assembly. We are unable to answer legal questions or respond to requests for legal advice, including application of law to specific fact. To understand and protect your legal rights, you should consult an attorney.