9VAC5-40-4030. Standard for volatile organic compounds.
A. Sheet basecoat (exterior and interior) and overvarnish; two-piece can exterior (basecoat and overvarnish).
1. No owner or other person shall cause or permit the discharge into the atmosphere from a coating application system any volatile organic compound in excess of 2.8 pounds per gallon of coating, excluding water, as delivered by the coating applicator.
2. Achievement of the emission standard in subsection A 1 of this section by use of methods in 9VAC5-40-4040 A will be acceptable to the board.
B. Two-piece and three-piece can interior body spray; two-piece can exterior end (spray or roll coat).
1. No owner or other person shall cause or permit the discharge into the atmosphere from a coating application system any volatile organic compound in excess of 4.2 pounds per gallon of coating, excluding water, as delivered by the coating applicator.
2. Achievement of the emission standard in subsection B 1 of this section by use of methods in 9VAC5-40-4040 B will be acceptable to the board.
C. Three-piece can side-seam spray.
1. No owner or other person shall cause or permit the discharge into the atmosphere from a coating application system any volatile organic compound in excess of 5.5 pounds per gallon of coating, excluding water, as delivered by the coating applicator.
2. Achievement of the emission standard in subsection C 1 of this section by use of methods in 9VAC5-40-4040 C will be acceptable to the board.
D. End sealing compound coating.
1. No owner or other person shall cause or permit the discharge into the atmosphere from a coating application system any volatile organic compound in excess of 3.7 pounds per gallon of coating, excluding water, as delivered by the coating applicator.
2. Achievement of the emission standard in subsection D 1 of this section by use of methods in 9VAC5-40-4040 D will be acceptable to the board.
E. No owner or other person shall use any coating system or equipment unless reasonable precautions are taken to minimize the discharge of emissions from cleaning or purging operations. Reasonable precautions may include the following:
1. The use of capture or control devices or both;
2. The use of detergents, high pressure water, or other non-volatile cleaning methods;
3. The minimization of the quantity of volatile organic compounds used to clean lines of equipment; and
4. The adjustment of production schedules to minimize coating changes thereby reducing the need for frequent cleaning or purging of a system.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2903, eff. July 1, 1991.