LIS

Virginia Law

Administrative Code

Creating a Report: Check the sections you'd like to appear in the report, then use the "Create Report" button at the bottom of the page to generate your report. Once the report is generated you'll then have the option to download it as a pdf, print or email the report.

Virginia Administrative Code
Title 9. Environment
Agency 5. State Air Pollution Control Board
Chapter 40. Existing Stationary Sources
12/31/2024

9VAC5-40-4040. Control technology guidelines.

A. Sheet basecoat (exterior and interior) and overvarnish; two-piece can exterior (basecoat and overvarnish). The control technology should consist of one or more of the following:

1. Use of electrodeposited waterborne coatings;

2. Use of ultraviolet coatings;

3. Use of high solids coatings;

4. Carbon adsorption; and

5. Incineration; or

6. Any technology of equal or greater control efficiency when compared to the use of coating complying with 9VAC5-40-4030 A 1, provided such technology is approved by the board.

B. Two-piece and three-piece can interior body spray; two-piece can exterior end (spray or roll coat). The control technology should consist of one or more of the following:

1. Use of waterborne coatings;

2. Use of powder coatings;

3. Use of high-solids coatings;

4. Carbon adsorption; and

5. Incineration; or

6. Any technology of equal or greater control efficiency when compared to the use of coating complying with 9VAC5-40-4030 B 1, provided such technology is approved by the board.

C. Three-piece can side-seam spray. The control technology should consist of one or more of the following:

1. Use of waterborne coatings;

2. Use of powder coatings; and

3. Use of high solids coatings; or

4. Any technology of equal or greater control efficiency when compared to the use of coating complying with 9VAC5-40-4030 C 1, provided such technology is approved by the board.

D. End sealing compound coating. The control technology should consist of one or more of the following:

1. Use of waterborne coatings;

2. Use of high-solids coatings; or

3. Any technology of equal or greater control efficiency when compared to the use of coating complying with 9VAC5-40-4030 D 1, provided such technology is approved by the board.

Statutory Authority

§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.

Historical Notes

Derived from VR120-04-2904, eff. July 1, 1991.

Website addresses provided in the Virginia Administrative Code to documents incorporated by reference are for the reader's convenience only, may not necessarily be active or current, and should not be relied upon. To ensure the information incorporated by reference is accurate, the reader is encouraged to use the source document described in the regulation.

As a service to the public, the Virginia Administrative Code is provided online by the Virginia General Assembly. We are unable to answer legal questions or respond to requests for legal advice, including application of law to specific fact. To understand and protect your legal rights, you should consult an attorney.