Virginia Law

A. In this section, the term "pesticide product" or "pesticide" refers only to a pesticide product or a pesticide that is subject to the regulations in Part IV of this chapter as described in 2VAC5-690-120 A through G.

B. Any registrant who distributes or sells pesticide products in refillable containers and any registrant who conducts all of the repackaging for a pesticide product and does not distribute or sell the pesticide product to a refiller that is not part of the registrant's company for repackaging into refillable containers must comply with this section. Any registrant that repackages a product directly into refillable containers for sale or distribution and also sells or distributes other quantities of that product to an independent refiller for repackaging must meet the requirements in this section for those quantities the registrant distributes or sells directly and the requirements in 2VAC5-690-140 for those quantities that the registrant distributes or sells to an independent refiller.

C. A registrant is responsible for the pesticide product that the registrant distributes or sells in refillable containers not being adulterated or different from the composition described in its confidential statement of formula that is required under § 3 of FIFRA (7 USC § 136a).

D. For each pesticide product distributed or sold in refillable containers, the registrant must develop both of the following documents in writing.

1. The registrant must develop a refilling residue removal procedure that describes how to remove pesticide residue from a refillable container (portable or stationary pesticide container) before it is refilled.

a. The refilling residue removal procedure must be adequate to ensure that the composition of the pesticide product does not differ at the time of its distribution or sale from the composition described in its confidential statement of formula that is required under § 3 of FIFRA (7 USC § 136a).

b. If the refilling residue removal procedure requires the use of a solvent other than the diluent used for applying the pesticide as specified on the labeling under "Directions for Use," or if there is no diluent used for application, the refilling residue removal procedure must describe how to manage any rinsate resulting from the procedure in accordance with applicable federal and state regulations.

2. The registrant must develop a description of acceptable refillable containers (portable or stationary pesticide containers) that can be used for distributing or selling that pesticide product.

a. An acceptable container is one that the registrant has determined meets the standards in Part III (2VAC5-690-70 et seq.) of this chapter and is compatible with the pesticide formulation intended to be distributed and sold using the refillable container.

b. The registrant must identify the containers by specifying the container materials of construction that are compatible with the pesticide formulation and specifying information necessary to confirm compliance with the refillable container requirements in Part III of this chapter.

E. A refiller at a registrant's establishment that repackages a pesticide product into refillable containers for distribution or sale must comply with all of the following provisions.

1. The establishment must be registered with EPA as a producing establishment as required by 40 CFR 167.20.

2. The refiller must not change the pesticide formulation unless the refiller has a registration for the new formulation.

3. The refiller must repackage a pesticide product only into a refillable container that is identified on the registrant's description of acceptable containers for that pesticide product.

4. The refiller may repackage any quantity of a pesticide product into a refillable container up to the rated capacity of the container. In addition, there are no general limits on the size of the refillable containers that the refiller can use.

5. The refiller must have all of the following items at the establishment before repackaging a pesticide product into any refillable container for distribution or sale:

a. The pesticide product's label and labeling;

b. The written refilling residue removal procedure for the pesticide product; and

c. The written description of acceptable containers for the pesticide product.

6. Before repackaging a pesticide product into any refillable container for distribution or sale, the refiller must identify the pesticide product previously contained in the refillable container to determine whether a residue removal procedure must be conducted in accordance with subsection G of this section. The refiller may identify the previous pesticide product by referring to the label or labeling.

7. The refiller must inspect each refillable container according to subsection F of this section.

8. The refiller must clean each refillable container according to subsection G or H of this section, if required by either subsection.

9. The refiller must ensure that each refillable container is properly labeled according to subsection I of this section.

10. The establishment must maintain records in accordance with subsection J of this section.

11. The establishment must maintain records as required by 40 CFR Part 169.

12. The establishment must report as required by 40 CFR Part 167.

F. Before repackaging a pesticide product into any refillable container, a refiller at a registrant's establishment must visually inspect the exterior and (if possible) the interior of the container and the exterior of appurtenances. The purpose of the inspection is to determine whether the container meets the necessary criteria with respect to continued container integrity, required markings, and openings. If the condition in subdivision 1 of this subsection exists, the container fails the inspection and must not be refilled unless the container is repaired, reconditioned, or remanufactured in compliance with the relevant USDOT requirement. If the condition in subdivision 2 or 3 of this subsection (or both) exists, the container fails the inspection and must not be refilled until the container meets the standards specified in Part III of this chapter. The conditions are:

1. The integrity of the container is compromised in at least one of the following ways:

a. The container shows signs of rupture or other damage that reduces its structural integrity;

b. The container has visible pitting, significant reduction in material thickness, metal fatigue, damaged threads or closures, or other significant defects;

c. The container has cracks, warpage, corrosion, or any other damage that might render it unsafe for transportation; or

d. There is damage to the fittings, valves, tamper-evident devices or other appurtenances that may cause failure of the container.

2. The container does not bear the markings required by 2VAC5-690-90 B through E, or such markings are not legible.

3. The container does not have an intact and functioning one-way valve or tamper-evident device on each opening other than a vent, if required.

G. A refiller at a registrant's establishment must clean each refillable container by conducting the pesticide product's refilling residue removal procedure before repackaging the pesticide product into the refillable container, unless the conditions in subdivisions 1 and either 2 or 3 of this subsection are satisfied.

1. If required, each tamper-evident device and one-way valve is intact.

2. The refillable container is being refilled with the same pesticide product.

3. Both of the following conditions are satisfied:

a. The container previously held a pesticide product with a single active ingredient and is being used to repackage a pesticide product with the same single active ingredient.

b. There is no change that would cause the composition of the product being repackaged to differ from the composition described in its confidential statement of formula that is required under § 3 of FIFRA (7 USC § 136a). Examples of unallowable changes include the active ingredient concentration increasing or decreasing beyond the limits established by the confidential statement of formula or a reaction or interaction between the pesticide product being repackaged and the residue remaining in the container.

H. As required in subsection G of this section, a refiller at a registrant's establishment must clean each refillable container that has a tamper-evident device that is not intact or one-way valve that is not intact by conducting the pesticide product's refilling residue removal procedure before repackaging the pesticide product into the refillable container. In addition, other procedures may be necessary to assure that product integrity is maintained in such cases.

I. Before distributing or selling a pesticide product in a refillable container, a refiller must ensure that the label of the pesticide product is securely attached to the refillable container such that the label can reasonably be expected to remain affixed during the foreseeable conditions and period of use. The label and labeling must comply in all respects with the requirements of 40 CFR Part 156. In particular, the refiller must ensure that the net contents statement and EPA establishment number appear on the label.

J. Each establishment of a registrant that repackages a pesticide product into refillable containers for distribution or sale must maintain all of the records listed in this section in addition to the applicable records identified in 40 CFR Part 167 and 40 CFR Part 169. The establishment must furnish these records for inspection and copying within 72 hours of request by an employee of VDACS.

1. For each pesticide product distributed or sold in refillable containers, both of the following records must be maintained for the current operating year and for three years afterwards:

a. The written refilling residue removal procedure for the pesticide product; and

b. The written description of acceptable containers for the pesticide product.

2. Each time a refiller at a registrant's establishment repackages a pesticide product into a refillable container and distributes or sells the product, the following records must be generated and maintained for at least three years after the date of repackaging:

a. The EPA registration number of the pesticide product distributed or sold in the refillable container;

b. The date of the repackaging; and

c. The serial number or other identifying code of the refillable container.