Article 27. Emission Standards for Magnet Wire Coating Application Systems (Rule 4-27)
9VAC5-40-3710. Applicability and designation of affected facility.
Article 27
Emission Standards for Magnet Wire Coating Application Systems (Rule 4-27)
A. Except as provided in subsection C of this section, the affected facility to which the provisions of this article apply is each magnet wire coating application system.
B. The provisions of this article apply only to sources of volatile organic compounds in volatile organic compound emissions control areas designated in 9VAC5-20-206.
C. The provisions of this article do not apply to coating application systems used exclusively for determination of product quality and commercial acceptance provided:
1. The operation is not an integral part of the production process;
2. The emissions from all product quality coating application systems do not exceed 400 pounds in any 30 day period; and
3. The exemption is approved by the board.
Statutory Authority
§ 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2701, eff. July 1, 1991.
9VAC5-40-3720. Definitions.
A. For the purpose of these regulations and subsequent amendments or any orders issued by the board, the words or terms shall have the meanings given them in subsection C of this section.
B. As used in this article, all terms not defined here shall have the meanings given them in 9VAC5 Chapter 10 (9VAC5-10-10 et seq.), unless otherwise required by context.
C. Terms defined.
"Application area" means the area where the coating is applied by spraying, dipping or flow coating techniques.
"Coating applicator" means an apparatus used to apply a surface coating.
"Coating application system" means any operation or system where a surface coating of one type or function is applied, dried or cured and which is subject to the same emission standard. May include any equipment which applies, conveys, dries or cures a surface coating, including, but not limited to, spray booths, flow coaters, flashoff areas, air dryers, drying areas and ovens. It is not necessary for a coating application system to have an oven, flashoff area or drying area to be included in this definition.
"Flashoff area" means the space between the application area and the oven.
"Magnet wire coating" means the process of applying a coating, electrically insulating varnish or enamel to aluminum or copper wire for use in electrical machinery.
"Oven" means a chamber within which heat is used to bake, cure, polymerize or dry a surface coating or any combination of those.
Statutory Authority
§ 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2702, eff. July 1, 1991.
9VAC5-40-3730. Standard for volatile organic compounds.
A. No owner or other person shall cause or permit the discharge into the atmosphere from a coating application system any volatile organic compound in excess of 1.7 pounds per gallon of coating, excluding water, as delivered by the coating applicator.
B. Achievement of the emission standard in subsection A of this section by use of methods in 9VAC5-40-3740 will be acceptable to the board.
C. No owner or other person shall use any coating system or equipment unless reasonable precautions are taken to minimize the discharge of emissions from cleaning or purging operations. Reasonable precautions may include the following:
1. The use of capture or control devices or both.
2. The use of detergents, high pressure water, or other nonvolatile cleaning methods.
3. The minimization of the quantity of volatile organic compounds used to clean lines of equipment.
4. The adjustment of production schedules to minimize coating changes thereby reducing the need for frequent cleaning or purging of a system.
Statutory Authority
§ 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2703, eff. July 1, 1991.
9VAC5-40-3740. Control technology guidelines.
The control technology should consist of one or more of the following:
1. Use of waterborne coatings.
2. Use of powder coatings.
3. Incineration.
4. Any technology of equal or greater control efficiency when compared to the use of coating complying with 9VAC5-40-3730 A, provided such technology is approved by the board.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2704, eff. July 1, 1991.
9VAC5-40-3750. Standard for visible emissions.
The provisions of Article 1 (9VAC5-40-60 et seq.) of this chapter (Emission Standards for Visible Emissions and Fugitive Dust/Emissions, Rule 4-1) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2705, eff. January 1, 1985.
9VAC5-40-3760. Standard for fugitive dust/emissions.
The provisions of Article 1 (9VAC5-40-60 et seq.) of this chapter (Emission Standards for Visible Emissions and Fugitive Dust/Emissions, Rule 4-1) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2706, eff. January 1, 1985.
9VAC5-40-3770. Standard for odor.
The provisions of Article 2 (9VAC5-40-130 et seq.) of this chapter (Emission Standards for Odor, Rule 4-2) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2707, eff. January 1, 1985.
9VAC5-40-3780. Standard for toxic pollutants.
The provisions of Article 3 (9VAC5-40-160 et seq.) of this chapter (Emission Standards for Toxic Pollutants, Rule 4-3) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2708, eff. January 1, 1985.
9VAC5-40-3790. Compliance.
A. The provisions of 9VAC5-40-20 (Compliance) apply.
B. The emission standards in 9VAC5-40-3730 apply coating by coating or to the volume weighted average of coatings where the coatings are used on a single coating application system and the coatings are the same type or perform the same function. Such averaging shall not exceed 24 hours.
C. Compliance determinations for control technologies not based on compliant coatings (i.e., coating formulation alone) shall be based on the applicable standard in terms of pounds of volatile organic compounds per gallon solids or pounds of volatile organic compounds per gallon solids applied according to the applicable procedure in 9VAC5-20-121.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2709, eff. July 1, 1991.
9VAC5-40-3800. Test methods and procedures.
The provisions of 9VAC5-40-30 (Emission Testing) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2710, eff. January 1, 1985.
9VAC5-40-3810. Monitoring.
The provisions of 9VAC5-40-40 (Monitoring) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2711, eff. January 1, 1985.
9VAC5-40-3820. Notification, records and reporting.
The provisions of 9VAC5-40-50 (Notification, records and reporting) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2712, eff. January 1, 1985.
9VAC5-40-3830. Registration.
The provisions of 9VAC5-20-160 (Registration) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2713, eff. January 1, 1985.
9VAC5-40-3840. Facility and control equipment maintenance or malfunction.
The provisions of 9VAC5-20-180 (Facility and Control Equipment Maintenance or Malfunction) apply.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2714, eff. January 1, 1985.
9VAC5-40-3850. Permits.
A permit may be required prior to beginning any of the activities specified below and the provisions of 9VAC5 Chapter 50 (9VAC5-50-10 et seq.) and 9VAC5 Chapter 80 (9VAC5-80-10 et seq.) may apply. Owners contemplating such action should contact the appropriate regional office for guidance.
1. Construction of a facility.
2. Reconstruction (replacement of more than half) of a facility.
3. Modification (any physical change to equipment) of a facility.
4. Relocation of a facility.
5. Reactivation (restart-up) of a facility.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Historical Notes
Derived from VR120-04-2715, eff. January 1, 1985.