6VAC15-81-1060. Security fasteners.
A. Fasteners within the secure perimeter shall be pinned Torx or flush break-off head style fasteners installed with thread locking fluid. Spanner type screws are prohibited.
B. Security fasteners are required in locations as follows:
1. Direct supervision control panels.
2. Inmate accessible elevator cabs and control panels.
3. Security lock mounting plates.
4. Glazing stops for security windows.
5. Security light fixtures.
6. Hinges for security doors.
7. Field fabricated equipment.
8. Installed furnishings and equipment including annunciator panels, fire extinguisher cabinets, thresholds, kickplates, grab bars, mirrors, floor drains, air diffusers, light switch plates, outlet covers, intercoms, thermostats, and cameras in inmate accessible areas.
C. Fixed tables and bunks shall be secured with fasteners as specified in this section or with peened or tack-welded anchor bolts and nuts to prevent removal.
D. Security fasteners are not required for the following:
1. Mechanical, electrical, generator, elevator equipment, or communication equipment in locked rooms with security doors not accessible to inmates or inside enclosed control rooms.
2. Above security ceilings, behind secure locked access doors or panels, and within secure pipe and duct chases.
3. Movable furnishings, storage shelving, or cabinet hardware.
4. Laundry and kitchen equipment.
5. Equipment mounted higher than 15 feet above finished floor or within six feet of the tier.
6. Outside the secure perimeter.
Statutory Authority
§§ 53.1-5, 53.1-80, and 53.1-82 of the Code of Virginia.
Historical Notes
Derived from Virginia Register Volume 34, Issue 12, eff. March 8, 2018.