Chapter 50. Boiler and Pressure Vessel RegulationsRead Chapter
- Part I.Read allDefinitions
- Section 10
- Definitions
- Section 15
- Effective date of certain requirements of the regulation
- Part II.Read allAdministration
- Section 20
- Minimum construction standards for boilers and pressure vessels
- Section 30
- Frequency of inspections of boilers and pressure vessels
- Section 40
- Notification of inspection
- Section 50
- Examination for an inspector's certificate of competency
- Section 60
- Examination fees
- Section 70
- Certificate of competency and identification card
- Section 80
- Inspectors to have no other interests
- Section 90
- Inspection reports to be submitted by special inspectors
- Section 100
- Insurance companies and contract fee inspectors to notify Chief Inspector of contractual changes
- Section 110
- Special inspectors to notify Chief Inspector of unsafe boilers and pressure vessels
- Section 120
- Owner-user inspection agency
- Section 130
- Defective conditions disclosed at time of external inspection
- Section 140
- Owner or user to notify chief inspector of accident
- Section 150
- Inspection certificate and inspection fees
- Section 160
- Validity of inspection certificate
- Section 170
- Restamping boilers and pressure vessels
- Section 180
- Penalty for operation of unsafe boilers and pressure vessels
- Section 190
- Condemned boilers and pressure vessels
- Section 200
- Reinstallation of standard boilers or pressure vessels
- Section 210
- Installation or reinstallation of nonstandard boilers or pressure vessels
- Section 220
- Installation of used or secondhand boilers or pressure vessels
- Section 230
- Reinstalled boiler or pressure vessel
- Section 240
- Factor of safety for existing installations
- Section 250
- Repairs or alterations
- Section 260
- Removal of safety appliances
- Section 270
- Review fees
- Section 280
- Requirements for new installations
- Section 290
- Application of Commonwealth serial numbers
- Section 300
- Return loop connection
- Section 310
- Ladders, platforms, and runways
- Section 320
- Exit from boiler room
- Section 330
- Operation
- Section 340
- Burner controls and safety devices
- Section 350
- Repairs and renewals of boiler fittings and appliances
- Part III.Read allExisting Installations
- Section 360
- Power and high-pressure, high-temperature water boilers
- Section 370
- Heating boilers
- Section 380
- Pressure vessels
- Part IV.Read allGeneral Requirements
- Section 390
- Inspection of boilers and pressure vessels
- Section 400
- Boilers and pressure vessels improperly prepared for inspection
- Section 410
- Removal of covering to permit inspection
- Section 420
- Lap-seam crack
- Section 430
- Hydrostatic pressure tests
- Section 440
- Automatic low-water fuel cutoff and/or water-feeding device
- Section 445
- Pressure control devices
- Section 450
- Pressure-reducing valves
- Section 460
- Blowoff equipment
- Section 470
- Location of discharge piping outlets
- Section 480
- Repairs and alterations
- Section 490
- Supports
- Section 500
- Boiler door latches
- Section 510
- Clearance
- Section 520
- Ladders and runways
- Section 530
- Air and ventilation requirements
- Section 540
- Jacketed kettles and miniatures boilers
- Section 550
- Fuel burning apparatus and systems (flame safeguard)
- Section 560
- Inspection of secondhand or used boilers or pressure vessels
- Section 570
- Conditions not covered by this chapter